For CNC transverse shearing machinery, correct operation and use can prevent abnormal wear and tear of machine tools and avoid sudden failures; do a good job in daily maintenance, so that the equipment can maintain a good technical state, delay the deterioration process, and timely discover and eliminate hidden troubles. , so as to ensure safe operation. How to operate and use the horizontal shearing machine correctly, we must first understand the CNC horizontal shearing machine:
Operating environment of CNC horizontal shearing machine: In order to improve the service life of CNC horizontal shearing machine, it is generally required to avoid direct sunlight and other thermal radiation, and avoid places that are too humid, excessive dust or corrosive gas. Corrosive gases can easily corrode and deteriorate electronic components, resulting in poor contact or short circuit between components, affecting the normal operation of the equipment. Precision CNC transverse shearing machines should be kept away from equipment with large vibrations, such as punching machines, forging equipment, etc., and try to keep a certain distance from these equipments. Enterprises with conditions can set up iron core transverse shearing workshops separately.
Power supply requirements: In order to avoid the influence of large fluctuation of power supply (greater than ±10%) and possible instantaneous interference signals, CNC horizontal shears generally use dedicated line power supply (such as a separate channel from the low-voltage power distribution room for CNC machine tools) or additional stable Voltage devices, etc., can reduce the impact of power supply quality and electrical interference.
Transformer cross-cutting line
Operating procedures: The operating procedures are one of the important measures to ensure the safe operation of the CNC horizontal shearing machine, and the operator must operate according to the operating procedures. When the machine tool fails, the operator should pay attention to keeping the scene, and truthfully explain the situation before and after the failure to the maintenance personnel, so as to analyze and diagnose the cause of the failure and eliminate it in time. In addition, the CNC horizontal shearing machine should not be stored for a long time. After purchasing the CNC horizontal shearing machine, it should be fully utilized, especially in the first year of use, so that the weak links that are prone to failure are exposed as soon as possible, and can be eliminated within the warranty period. When there is no processing task, the CNC machine tool should also be energized regularly. It is recommended to energize 1-2 times a week and run dry for about 1 hour each time, so as to use the heat generated by the machine tool to reduce the humidity inside the machine, so that the electronic components will not get wet. At the same time, it can also find out whether the battery alarm occurs in time to prevent the loss of system software and parameters.
Machining accuracy: CNC transverse shears generally analyze the size of part of the iron core when customizing, such as the shearing width of the product, the size of the aperture, the setting of the common aperture, the distance from the aperture to the edge, the thickness of the processed material, etc. After sufficient comprehensive consideration, after the perfect combination of mold manufacturing and numerical control equipment, we strive to achieve a very good value for the machining accuracy of the iron chip. Although the price of the customized CNC horizontal shearing machine is quite different from that of the low-end processing equipment, it still feels very cost-effective compared with the processed high-quality products. All can be processed completely, and the indicators of the finished products can meet the international IEC standards.